Hotbrick VPN 800 Manuale Utente

HotBrick Network Solutions 

Page 38 

Use this to enable or disable the DMZ setting, as required. 

Enter a name to assist you to remember this setting. This name has no effect 
on the operation. 

Public IP address  Enter the WAN port (Internet) IP address you wish to associate to a PC. This 

IP address must have been allocated to you by your ISP. 

Enter the IP address of the PC you wish to associate with this WAN port IP 
address. This IP address should be fixed, or reserved. (See the Host IP 
section for details on reserving an IP address.) 

Select the desired WAN port. 

•  Select "DHCP" if the IP address on this WAN port is dynamically 

assigned. You can only select assign one (1) Private (LAN) IP address to 
each port. 

•  If using multi-session PPPoE, select the desired PPPoE session. These 

sessions are defined on the Advanced PPPoE screen. You can assign 
one (1) one (1) Private (LAN) IP address to each PPPoE session. 

Enter the IP address of the PC you wish to associate with this WAN port IP 
address. This IP address should be fixed, or reserved. (See the Host IP 
section for details on reserving an IP address.) 

You can decide the users to have the authority of using DMZ, by define the 
groups. 

For DMZ, you can allow inbound, outbound only, or both inbound and 
outbound both.