Brother HL-3170CDW Manuale Proprietario
Troubleshooting
162
5
Replace WT Box
It is time to replace the waste toner
box.
box.
Replace the waste toner box (see Replacing the
waste toner box on page 133).
waste toner box on page 133).
Short Paper
The length of the paper in the tray is
too short for the machine to deliver it
to the Face-down output tray.
too short for the machine to deliver it
to the Face-down output tray.
Open the back cover (face-up output tray) to let the
printed page exit onto the face-up output tray.
Remove the printed pages and then press Go.
printed page exit onto the face-up output tray.
Remove the printed pages and then press Go.
Size Error DX
The paper size defined in the printer
driver and the control panel menu is
not available for automatic 2-sided
printing.
driver and the control panel menu is
not available for automatic 2-sided
printing.
Press Cancel. Choose a paper size that is supported
by 2-sided printing.
by 2-sided printing.
The paper size for automatic 2-sided printing is
Letter, Legal or Folio.
Letter, Legal or Folio.
The paper in the tray is not the
correct size and is not available for
automatic 2-sided printing.
correct size and is not available for
automatic 2-sided printing.
Load the correct size of paper in the tray and set the
size of paper for the tray (see Paper Tray
on page 87).
size of paper for the tray (see Paper Tray
on page 87).
The paper size for automatic 2-sided printing is
Letter, Legal or Folio.
Letter, Legal or Folio.
Size Mismatch
The paper in the indicated tray is not
the correct size.
the correct size.
Put the same size paper in the paper tray that is
selected in the printer driver, and then press Go, or in
the printer driver select the size of paper that you
loaded in the indicated paper tray.
selected in the printer driver, and then press Go, or in
the printer driver select the size of paper that you
loaded in the indicated paper tray.
Small Paper
The paper size specified in the
printer driver is too small for the
machine to deliver it to the Face-
down output tray.
printer driver is too small for the
machine to deliver it to the Face-
down output tray.
Open the back cover (face-up output tray) to let the
printed paper out on the face-up output tray and then
press Go.
printed paper out on the face-up output tray and then
press Go.
Toner Error
One or more toner cartridges are
not installed correctly.
not installed correctly.
Pull out all the drum units. Take out all the toner
cartridges, and then put them back into the drum
units.
cartridges, and then put them back into the drum
units.
Toner Low: X
(X shows the toner
cartridge or drum unit
color that is near the end
of its life. BK=Black,
C=Cyan, M=Magenta,
Y=Yellow.)
cartridge or drum unit
color that is near the end
of its life. BK=Black,
C=Cyan, M=Magenta,
Y=Yellow.)
If the LCD shows Toner Low you
can still print; however, the machine
is telling you that the toner cartridge
is near the end of its life.
can still print; however, the machine
is telling you that the toner cartridge
is near the end of its life.
Order a new toner cartridge now so a replacement
toner cartridge will be available when the LCD shows
Replace Toner
toner cartridge will be available when the LCD shows
Replace Toner
.
WT Box End Soon
The waste toner box is almost full.
Order a new waste toner box before you get a
Replace WT Box
Replace WT Box
message.
Error message
Cause
Action