Bay Technical Associates BayStack 303 Manuale Utente
Installing the BayStack Switches
893-01010-A
2-5
Figure 2-2.
Installing metal chassis in rack
2.
Position the switch in the rack and align the holes in the mounting
bracket with the holes in the rack (see
bracket with the holes in the rack (see
3.
Insert two screws, appropriate for your 19-inch rack, into each of the
mounting brackets and tighten (see
mounting brackets and tighten (see
).
4.
To continue installation, go to
”
Installing a Plastic Chassis in a Rack
The plastic chassis requires different rack mounting brackets. The plastic chassis
rack mounting brackets use slots in the sides of the chassis. Determine which
position you want for the switch in the rack and select the appropriate slots (see
rack mounting brackets use slots in the sides of the chassis. Determine which
position you want for the switch in the rack and select the appropriate slots (see
To install a plastic chassis in a rack, follow these steps:
1.
Locate the appropriate mounting slots on both sides of the switch (see
).
7529FB
89301010.BK Page 5 Tuesday, June 10, 1997 8:00 PM