Eva Solo LX-90TM Manuale Utente

To install or replace the ribbon, just follow these steps:

If you’ve been using your printer just before you change rib-

bon cassettes, be careful not to touch the print head because it

becomes hot during use. Also remember never to move the

ribbon carriage manually when the printer is turned on,

because you may damage your printer.

1. 

Make sure the printer is turned OFF. Remove the front lid of the

printer so that you can see the ribbon carriage.

2. Slide the ribbon carriage manually to the center of the printer so

that the other parts of the printer do not get in your way. Also be

sure that the paper bail is against the black roller.

3. If you are changing ribbon cassettes, lift the front of the old cassette

and remove it.

4.

Hold the new ribbon cassette so that the small knob is on top and

the exposed ribbon faces away from you. Fit the cassette onto the

ribbon carriage by sliding the pins at the back of the cassette under

the small hooks on the carriage.

4