Brother BAS-300G-484/484SF Manuale Proprietario

8. MAINTENANCE 

 

 

52

KE-430D, BE-438D 

 

Periodically apply grease to the sliding parts of the work 

clamp (1) and the work clamp arm (2).

   

After replacing the work clamp (1), be sure to apply 

grease before using it.

 

* It is recommended that you use commercially-available 

NIPPON OIL CORPORATION Powernoc WB 2 grease 

for the work clamp (1). 

 

 
 
 
 
 
 
 
 
 

 

 

If “GrE” and “AS.UP" flash on the PROGRAM No. display (1) and the menu display (2) respectively, and a buzzer sounds 

when the power switch is turned on, it means that grease needs to be applied. (The sewing machine will not operate at this 

time, even if the foot switch is depressed.) 
Apply grease as required, while referring to the following for details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.  Press the RESET key (3). 

2.  The PROGRAM No. display (1) and the menu display (2) will change to the normal displays, and sewing can be carried 

out by depressing the foot switch. 

•  "GrE" and "AS.UP" will continue to be displayed each time the power is turned on until grease is applied and the 

notification is reset by carrying out the procedure on page 54. 

•  If you continue to use the sewing machine after the “GrE” and “AS.UP" notification appears without applying grease 

(or without carrying out the reset procedure), “E100” will appear after a certain period of time and the sewing 

machine will be forcibly prevented from operating for safety reasons. 

If this happens, apply grease and carry out the reset procedure. 

 

problems with the sewing machine may result. 

 

 

4485Q

 

3922M

Grease 

Viewed from directly above