Beringer BERING CM-E73X Dépliant

       

 

    

X  Maximum weight limit is 20 pounds (9.1 kg).  

Do not exceed this limit. 

X  Always use caution and care when working with 

heavy projectors. 

      DO NOT TAKE UNNECESSARY RISKS! 

X  Once you have chosen a location for the mount, 

determine the construction of the ceiling. 
•  Solid wood surface: a beam, or a wood joist 

inside the wallboard. 

•  Wallboard: sheet rock, plasterboard or 

paneling. 

•  Masonry: plaster, cement or brick. 

X  It is recommended that the ceiling mount be 

mounted to a ceiling beam or wood joist. 

 

X  CAUTION: Use only the supplied TOGGLER® 

TC® drywall/plasterboard anchors to support the 
ceiling mount screws. Use them as anchors to 
fasten the ceiling mount to sheet rock, plaster 
board or paneling. Use the TOGGLER® Alligator® 
anchor for solid wood or masonry. (See enclosed 
TOGGLER® Anchoring Solutions brochure.) 

X  Before installing the ceiling mount, make sure the 

mounting location is sturdy enough to support the 
projector. If you are not sure that your location will 
hold the projector’s weight, contact a professional 
contractor for advice. 

X  Recommend maximum extension; do not exceed 

15 inches if the base join is angled. 

 

•  Hex wrench (included). 

•  Phillips screwdriver  

•  Drill with a 5/16” bit for the TC® anchors  

•  Drill with a 1/4” bit for the AF6 Alligator® anchors. 

•  Two crescent or 3/4" open-end wrenches. 

__________________________________________________________________________