Brother QL-650TD Manuale Utente

STEP 3 Maintenance and Troubleshooting

38

Eventually the cutting blade on the cutter unit will become dull (blunt) and need to be 

replaced. At the appropriate time, purchase a new replacement cutter unit and install it 

according to the following procedure.

Check that the cutter unit is located at the home position.

Turn OFF the power to the printer and pull out the power cord from 

the wall outlet.

Open the DK Roll cover and pull the roll 

release lever to the up position. Remove the 

DK Roll.

Lift up the cutter cover.

Using a cross-head screwdriver, loosen 

the screw which holds the cutter blade unit 

in-place.

The screw securing the cutter unit should not be 

completely removed. Simply loosen it to remove 

the cutter unit from the printer.