Brother QL-650TD Manuale Utente

Introduction

4

„

Power Cord 

Use only the authorized power source 

(220 - 240 V AC) for the printer.
Use only the power cord included with 

the printer.
Do not overload the power outlet socket 

with too many appliances or insert the 

power cord into a damaged outlet 

socket.

 Do not cut, damage, alter or place heavy 

objects on the power cord. 

Do not use the power cord if it is 

damaged. 
Do not handle the power cord or plug if 

your hands are wet.
Ensure the power plug is correctly 

inserted into the power outlet. 
If the printer will not be used for an 

extended period, remove the power 

supply cord from the electrical outlet.

„

Battery

Only use the correct type of battery for 

the printer.
Do not attempt to disassemble, alter, 

apply heat or expose to a direct flame, 

direct sunlight or extremely high 

temperatures and humidity.
Immediately flush with water any area of 

the body that comes into contact with the 

inner contents of the battery. Seek 

medical assistance should the contents 

come into contact with the eyes or 

mouth.
Insert the battery ensuring the correct 

polarity is observed.
Do not allow the battery to get wet.
Remove the battery from the printer 

immediately at the end of its life.
Do not solder the battery directly.

Use of incorrect batteries for this printer 

may cause leakage or explosion, which 

could result in fire, injury or damage to 

the surroundings of the machine. 
Dispose of used batteries according to 

the instructions.
Do not short-circuit the battery terminals 

with metallic objects.
The supplied battery is not 

rechargeable. Do not attempt to 

recharge it.
Keep the battery away from children. 

Seek medical assistance immediately if 

the battery is swallowed.
Avoid dropping or subjecting the battery 

to severe impacts that can damage it.
Avoid subjecting the battery to 

ultrasound vibration. This could cause 

an internal short-circuit to occur.

Caution

„

The Printer

The standard electrical outlet should be close to the printer and be easily accessible.

„

Power Cord

Always hold the power plug when removing the power cord from or inserting it into the 

outlet. Pulling on the power cord cable could cause problems with the power cord.

Warning