Brother PT2030AD Manuale Proprietario

1

2

3

4

5

6

7

8

9

z

Printing a Label

Using the numbering function you can create a set of sequentially numbered labels 
from a single label format.

Make sure that the appropriate tape cassette is inserted and ready for printing.

Hold down the Shift key and press the Print key to display the print options 
screen, and then select "Numbering" using the   or   key.

Press the OK or Enter key.
The numbering start point screen is displayed.

Move the cursor to the first character to be 
incremented in the numbering sequence and press 
the OK or Enter key.
The numbering end point screen is displayed.

Move the cursor to the last character to be 
incremented in the numbering sequence and press 
the OK or Enter key.
The number of labels to be printed is displayed.

Select the number of labels to be printed using the   
or   key, or type the number using the number key.

Press the OK or Enter key.
The labels are printed.
As each label is printed the number of copies printed is shown.

To apply auto-numbering to a bar code, select the bar code 
here. After selecting the bar code you will be prompted to 
enter the number of labels to be printed (step 6).

Hold down the   or   key to change the number of 
labels faster.

• Press  the  Escape key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies”.
• Pressing the Space key when selecting the number of copies resets the value to 1, the default.
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-

numbering sequence, no other fields in the label can contain an auto-numbering sequence.

• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence are 

ignored.

• An auto-numbering sequence can only contain a maximum of five characters.