Brother pt-h300 Manuale Utente

1

2

3

4

5

6

7

8

9

z

Error Messages

When an error message appears on the display, follow the directions provided below.

An incompatible AC adapter is connected.

Use an appropriate AC adapter.

The installed batteries are getting weak.

The installed batteries are about to run out.

The battery is low. Please charge the lithium-ion battery.

The Li-ion is damaged. Please use an AC adapter or an other 

battery.

High temperature error.

The tape cutter is closed when you try to print or feed tape. Turn the 

P-touch labeler off and then on again before continuing. When tape 

is tangled in the cutter, remove the tape.

There is no tape cassette installed when you try to print or preview a 

label, or feed tape. Install a tape cassette before continuing.

The maximum number of characters have already been entered. Edit 

the text and use fewer characters.

There is no text, symbols or bar code data entered when you try to 

print or preview a label. Enter data before continuing.

There are already five lines of text when you press the Enter key. 

Limit the number of lines to five.

The value entered for setting the tape length, multiple copies or 

numbering function is invalid. Enter a valid value for the setting.

There are more than lines of text that can be input when you press 

the Print or Preview key while using 0.47"(12 mm) tape. Limit the 

number of lines to three, or replace with a larger width tape cassette.

There are more than two lines of text when you press the Print or 

Preview key while using 0.35" or 0.23" (9 mm or 6 mm) tape. Limit 

the number of lines to two, or replace with a larger width tape 

cassette.

There is more than one line of text when you press the Print or 

Preview key while using 0.13" (3.5 mm) tape. Limit the number of 

lines to one, or replace with a larger width tape cassette.