Brother P-TOUCH PT-97OOPC Manuale Proprietario

After the printer has been connected to the computer, labels can be created and printed.
This section describes how to create labels using a barcode reader and various useful print settings.

■ Printing labels at high speed or a high resolution

See “Printing at a higher speed or at a higher resolution” (

■ Printing a large number of labels distributed to multiple printers

See “Distributed printing” (

■ Printing using only a barcode reader without a computer

See “BTP (Barcode Template Print) function” (

■ Creating and printing simple labels by using P-touch Editor Lite LAN (PT-9800PCN only)

See “Using P-touch Editor Lite LAN (PT-9800PCN and Windows

■ Printing a list of the current printer settings

See “Printing the printer settings” (

The print speed and resolution can be changed depending on the combination of the type of tape 
being used and the selected output setting. With HG tape, labels can be printed at an even faster speed 
or higher resolution.

● When HG tape is used, printing can be performed at a faster speed than with TZ tape. (“Standard” setting)

● When HG tape is used with the “High Speed” setting selected, printing can be performed even faster. 

However, since the resolution in the feed direction is reduced, this is not suitable for detailed printing.

● When HG tape is used with the “High Resolution” setting selected, printing can be performed with an even 

higher resolution. This is suitable for detailed printing of objects such as graphics and curved lines.

● When printing barcodes, use the “Standard” setting, which has identical horizontal and vertical 

resolutions.

—

3.15"/sec 

(80 mm/sec)

360 × 180 dpi

0.78"/sec 

(20 mm/sec)

2.05"/sec 

(52 mm/sec)

360 × 360 dpi

—

0.78"/sec 

(20 mm/sec)

360 × 720 dpi

●

The print speeds listed above indicate the highest speeds possible. The actual speed may differ 
depending on the operating conditions.