Brother P-touch PT-9500PC Manuale Utente
26
Installation precautions
When installing the software on a personal
computer, note the following precautions
according to the operating environment used.
computer, note the following precautions
according to the operating environment used.
■ Connecting to a USB port
Do not connect the USB interface cable to
the personal computer until the software has
been installed.
If the USB interface cable is connected to a
personal computer before the software is
installed, the following dialog box will
appear. Click [Cancel], and then remove the
USB interface cable.
the personal computer until the software has
been installed.
If the USB interface cable is connected to a
personal computer before the software is
installed, the following dialog box will
appear. Click [Cancel], and then remove the
USB interface cable.
■ Connecting to a serial port
When connecting the PT-9500PC to a
personal computer using a serial connection,
connect the PT-9500PC to the personal
computer with the serial interface cable
before installing the software.
For details, refer to “Connecting to a personal
computer” (
personal computer using a serial connection,
connect the PT-9500PC to the personal
computer with the serial interface cable
before installing the software.
For details, refer to “Connecting to a personal
computer” (
■ Using Windows
®
NT 4.0/2000 Pro
When installing the software, log on using a
user name with administrator authority.
user name with administrator authority.
■ Using Windows
®
XP
When installing the software, log on using a
user name with computer administrator
authority.
user name with computer administrator
authority.
Installing using basic setup
To enable the personal computer to use the
PT-9500PC, install P-touch Editor 4.0, to design
labels, and the printer driver software.
Install P-touch Editor, and then install the
printer driver.
PT-9500PC, install P-touch Editor 4.0, to design
labels, and the printer driver software.
Install P-touch Editor, and then install the
printer driver.
1
Start the personal computer, and then insert
the CD-ROM into the CD-ROM drive.
the CD-ROM into the CD-ROM drive.
→The Brother Select Language dialog
box appears.
• It may take a short time until the Brother
Select Language dialog box appears.
• If the Brother Select Language box does
not appear, double-click the My
Computer icon, and then double-click
the P-touch icon.
Computer icon, and then double-click
the P-touch icon.
Note
●
Depending on the operating system
running on the personal computer, it may
be necessary to restart the personal
computer during installation. After
restarting the personal computer, log on
using the same user name and continue
the installation.
running on the personal computer, it may
be necessary to restart the personal
computer during installation. After
restarting the personal computer, log on
using the same user name and continue
the installation.
●
If a network printer is to be installed,
please use the advanced setup function.
please use the advanced setup function.
●
When installing only the printer driver,
refer to “Installing the printer driver only”
(
refer to “Installing the printer driver only”
(
●
The examples of dialog boxes from
Windows
Windows
®
XP are used in this guide. The
installation procedures for personal
computers running other operating
systems are basically the same.
computers running other operating
systems are basically the same.