Encore electronic 802.11n Manuale Utente

Mark to enable the configuration, and clear to disable. 

Fill in the IP address that you are going to filter. 

Select the protocol type of TCP, UDP or Both 

Select the filter mode of Always or by Schedule 

For filter mode of by Schedule, you have to define the 
filter date and time. 

After configure the above settings, click Add to add a 
new list in the following IP Filter Rule List. The Change 
button can be used to change the configuration. 

* Please click on the Save Settings button or the Reset Settings button on the above table   

to save/reset the configurations. 

Lists the IP Filter Settings you have added before. Click on the list to change 

configuration, or the Delete button to delete the list. 

 

34