Brother BB370 Manuale Proprietario

Pagina di 17
11
c
Select any of the following stitches.
→ Free-motion quilting foot “C” is indicated in the 
upper-left corner of the screen.
d
Remove the presser foot holder.
e
Attach free-motion quilting foot “C” at the 
front with the presser foot holder screw 
aligned with the notch in the quilting foot.
a
Presser foot holder screw
b
Notch
f
Hold the quilting foot in place with your right 
hand, and tighten the presser foot holder 
screw using the screwdriver with your left 
hand.
a
Presser foot holder screw
g
Lower the feed dog position switch to 
 to 
lower the feed dogs.
a
Feed dog position switch 
h
Use both hands to stretch the fabric taut, and 
then move the fabric at a consistent pace in 
order to sew uniform stitches roughly 2.0-2.5 
mm (approx. 1/16 - 3/32 inch) in length.
a
Stitch
i
Press 
 to cancel the free-motion sewing 
mode.
■ Using Free-motion Open Toe Quilting Foot 
“O”
The free-motion open toe quilting foot “O” is used
for free-motion quilting with zigzag or decorative
stitches or for free-motion quilting of straight lines
on fabric with an uneven thickness. Any stitch can
be sewn with the free-motion open toe quilting foot
“O”.
Free-motion open toe quilting foot “O”
Note
Make sure that the quilting foot is attached properly 
and not slanted.
 CAUTION
• Be sure to securely tighten the screws with the 
screwdriver. Otherwise, the needle may touch the 
quilting foot, causing it to bend or break.
a
b
a
Memo
Do not be discouraged with your initial results. The 
technique requires practice.
Note
Free-motion open toe quilting foot “O” can also be 
used with the straight stitch needle plate. We 
recommend using free-motion open toe quilting foot 
“O” with free-motion sewing of fabrics of uneven 
thicknesses.
Memo
In order to sew with a balanced tension, it may be 
necessary to adjust the upper thread tension. Test with 
a sample piece of quilting fabric.