Bosch Appliances Home Security System D7412G Manuale Utente

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED

EN | 96

Bosch Security Systems | 1/04 | 47775E

Default:

No

Selection:

Yes or No

Default:

No

Selection:

Yes or No

Default:

No

Selection:

Yes or No

Default:

No

Selection:

Yes or No

Default:

No

Selection:

Yes or No

Default:

No

Selection:

Yes or No

Default:

00:00

Selection:

HH:MM (hours and minutes)

00:00 to 23:59

Open Early Begin: This program item is one of
three required to create an Opening Window. To
finish programming an Opening Window, Open
Window Start and Open Window Stop must be
programmed.

Use Open Early Begin to set the time the control
panel looks for an Opening Window. When
Opening and Closing Reports are enabled,
disarming the area between midnight and the Open
Early Begin time generates an Opening Report. In
addition:

•

 

If Disable O/C in Window is Yes: Disarming
the area between the Open Early Begin and the
Open Window Start time generates an Early to
Open Event (if the Open Early Begin time is the
same as the Open Window Start time, the Early
to Open Event is not sent).
Disarming the area between the Open Window

Start and Open Window Stop time creates a
local event in the Panel log but does not send
the Opening Report to the central station.

Disarming the area after the Open Window Stop
and the next window’s Open Early Begin time
(or midnight, whichever comes sooner)
generates a Late to Open Event.

•

 

If Disable O/C in Window is Yes: Disarming
the area generates an Opening Report without
the early or late modifier, regardless of when the
area is disarmed.

When you are programming multiple windows
to activate on a single day, program the
windows in chronological order. Be careful not
to program a window’s Open Early Begin time
for a time that is between any other window’s
Open Window Start and Open Window Stop
time.

0101
0101
0101

Do not program a window to cross the
midnight boundary.

Disabled windows have a blank begin time. If the
entry for this prompt is blank, but times are
programmed for Open Window Start and Open
Window Stop, the window is disabled.

To disable the window, both the hours and minutes
spaces must be Blank.

00:00 is midnight, 23:59 is 11:59 PM. Make entries
using a 24-hour clock (for example, 7:00 AM is
entered as 07:00, 2:45 PM is entered as 14:45).

Disable/Restart the control panel to activate today’s
window. If you are programming a window that
must activate on the same day you are programming
it, do a disable/restart after programming.

Default:

00: 00

Selection:

HH:MM (hours and minutes)

Enter the time you want the control panel to start
the Opening Window. The window goes into effect
at the beginning of the minute.

00:00 is midnight, 23:59 is 11:59 PM. Make entries
using a 24-hour clock (for example, 7:00 AM is
entered as 07:00, 2:45 PM is entered as 14:45).

This program item is one of three required to create
an Opening Window. To program an Opening
Window, Open Early Begin and Open Window
Stop must also be programmed. See the 

W# Open

Early Begin

 prompt in this section  for report

feature explanations.