Bose VG917-KST Dépliant

Step 1.

Step 2.

Locate a safe flat surface on 
the dash or console to 
mount the pedestal. Clean 
the dash with the alcohol 
pad provided. Let the dash 
surface dry before applying 
the adhesive disc (C).

Push the pedestal suction 
cup (A) firmly to the disc (C). 
Flip the lever (B) down to 
secure the suction cup.

Step 1.

Step 1.

Step 2.

Step 3.

Adjust the angle of the pedestal head by loosening the 
adjustment knob (D).

Adjust the angle and rotation of the pedestal head by 
loosening the adjustment knob (E).
 
Attach the PSP cradle to the dual-T tab head (F) by inserting the 
T-tabs into the T-slots (G). 

Windshield Installation  

Step 1.

Step 2.

Step 3.

Insert PSP into the cradle at a slant so that the base of the PSP 
comes to rest on the spring loaded support legs (H). 

While firmly holding the cradle, push downward on the PSP so 
that the spring loaded support legs slide down. This allows 
enough clearance for the top of the PSP to slide under the top 
support clip (I).

To remove PSP from cradle follow step 2

Sony PSP Cradle Instructions 

 

CM017-KST-2

VG085

AP020

Push the pedestal suction cup (A) firmly to the windshield. 
Flip the lever (B) down to secure the suction cup. 

 

CM017-KST-L-2

VG085

AP020

Consumer Hotline: 
(USA)    (800) 841-0884
(INT'L)   (626) 254-9005
               Mon-Fri. 9am-5pm, PST

Arcadia, CA 91006 USA

Made in Taiwan

© Copyright 2007 Arkon Resources, Inc.

PSP is a trademark of Sony Computer Entertainment Inc.

Arkon Resources, Inc. is not affiliated with Sony Computer Entertainment Inc.

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or 
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to 
your car, your device, or yourself due to the installation or use of 
the pedestal mount.