Integra DTA-9.4 Manuale Utente
14
Specifications
Amplifier section
Continuous average power output
(FTC Power, Rated Power) (Measured with AES-17 LPF)
Front L/R:
120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Center:
120 Watts min. RMS. Into 8 ohms 1
channel driven, from 20 to 20,000 Hz
with no more than 1 % total harmonic
distortion.
channel driven, from 20 to 20,000 Hz
with no more than 1 % total harmonic
distortion.
240 Watts min. RMS. Into 4 ohms 1
channel driven, 1,000 Hz with no more
than 1.5 % total harmonic distortion.
channel driven, 1,000 Hz with no more
than 1.5 % total harmonic distortion.
Surround L/R:
120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Surround Back:
120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Dynamic Power Output
2
× 350 Watts at 2 ohms
2
× 267 Watts at 4 ohms
2
× 162 Watts at 8 ohms
Total Harmonic Distortion
(Measured with AES-17 LPF)
(Measured with AES-17 LPF)
1 % at rated power (1 kHz)
0.01 % at 1 watt output (1 kHz)
0.01 % at 1 watt output (1 kHz)
Damping Factor
25 at 8 ohms 1 kHz
Input Sensitivity and Impedance
1 V, 5 k ohms (Unbalanced)
2 V, 10 k ohms (Balanced)
5 - 12V dc (12V Trigger)
2 V, 10 k ohms (Balanced)
5 - 12V dc (12V Trigger)
Frequency Response
10 Hz to 60 kHz : +1 dB, –3 dB (8 ohms)
Signal to Noise Ratio
115 dB (IHF-A, 1 V input / Unbalanced
or 2 V input / Balanced)
General
Power Supply
AC 120 V, 60 Hz
Power Consumption
5.3 A
Power Consumption
in standby mode
in standby mode
3.8 W
Input terminals
Analog Audio:
Unbalanced (RCA type)
× 7
Balanced (XLR type)
× 7
Control:
12V TRIGGER (CONTROL LINK)
× 1
Power supply:
AC INLET (IEC type)
× 1
Output terminals
Analog Audio:
Speakers
× 7
Dimensions (W
× H × D)
17-1/8"
× 6-7/8" × 17-13/16"
Weight
39.0 lbs.
Specifications and features are subject to change without notice.