Binatone B350 Manuale Utente

QUICK START GUIDE 

 

8

  

                                                     Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)

 

 

The car mount has a suction pad that fits to the windscreen or a flat area on the 
dashboard. 
 
A. Fitting to windscreen 
Pull the lever away from the suction pad. Place the pad on the widescreen and push 
the lever towards the pad until it clicks into place. 

    

 

 
B. Fitting the holding bracket 
It is best to fit this to the unit before it is attached to the windscreen. 
Slide the bracket onto the securing lug on the end of the ball mount at the end of the 
car mount and then push down firmly, until it clicks in to place. The bracket can only 
be fitted one way. 
 

  

 

 
 
C. Fitting the Unit 
Slide the unit into the bottom of the bracket and carefully push the unit up and back 
until it clicks into place at the top. 
 
 
To remove the unit from the car mount; Press and lift the tab at the top of the bracket 
then pull the unit forward and up out of the bottom of the bracket. 
 
To remove the Car mount from the windscreen; Lift the lever away from the 
windscreen, then gentle pull the tab on the suction cup to release the suction as you 
pull the mount away from the windscreen.