West Marine Marine Radio VHF580 Manuale Utente
31
enter the MMSI number you want to call. Enter the MMSI number the same way you
enter directory entries (see page 22). Enter all nine digits and press
ENT-1W/25W
.
4. The radio displays the MMSI number you are about to contact and asks you to confirm. If
you want to transmit your position to the displayed MMSI number, select Send. To cancel
the transmission, select Cancel.
5. The radio transmits your MMSI number, your longitude, and your latitude to the other
station.
putting the radio into standby
If you are leaving your radio or do not wish to answer any DSC calls, you can put your radio
in standby mode. If your radio receives an individual call, it will automatically respond with a
message that indicates your radio is currently unattended. Follow the steps below to put
your radio in standby:
1. Display the Call menu.
2. Select Standby to place your radio in standby mode. The radio displays the standby
screen, above.
3. To cancel standby and return to the mode your radio was in, press any button.
Disabling automatic channel switching
If you are involved in a bridge-to-bridge call, you may not want the radio to automatically
switch channels when it receives a DSC call. In cases like this, you can disable automatic
channel switching. If you receive an individual call, the radio will respond with an
unattended code, just as if the radio were in Standby.
1. Press and hold
CALL-MENU
to display the normal menu.
2. Select Setup and then Auto CH SW.
3. Choose Off and press
ENT-1W/25W
. The radio will not automatically switch channels until
you reactivate this feature.
#
nOte: use this feature with caution. Deactivating automatic switching and then forgetting it
can make it hard for you to receive DsC calls.
can make it hard for you to receive DsC calls.
If you have unread incoming DSC calls, the radio displays a message icon. You will be able
to review who has called. The radio displays the last 10 distress calls and the last 20 non-
distress calls it received (see the receive log on page 27).
renaming Channels
If you discover that a marine radio channel has a different common name in your local area,
you can change the name of that channel to make it easier for you to use (see the channel
lists beginning on page
41
for the default channel names). To rename a channel, follow the
steps below:
01
A
1 Watt USA
Memory
Memory
DSC Standby
Unattended
Unattended
Standby
Press