Whirlpool GSC278 YGSC278 Manuale Utente

Pagina di 16
9
Baking and Roasting
1. Broil element
2. Bake element
ACCUBAKE
®
 Temperature Management System
(on some models)
The ACCUBAKE system electronically regulates the oven heat 
levels during preheat and bake to maintain a precise temperature 
range for optimal cooking results. The bake and broil elements 
cycle on and off in intervals. The bake element will glow red when 
cycling on, the broil element will not. This feature is automatically 
activated when the oven is in use.
Before baking and roasting, position racks according to the 
“Positioning Racks and Bakeware” section. When roasting, it is 
not necessary to wait for the oven preheat conditioning time to 
end before putting food in unless recommended in the recipe.
If the lower oven door is opened during baking and roasting, the 
broil element will turn off immediately and the bake element will 
turn off in 2 minutes. They will come back on once the door is 
closed.
To Bake or Roast:
1. Press BAKE.
Press the number pads to enter a temperature other than 
350°F (177°C). The bake range can be set between 170°F 
and 500°F (77°C and 260°C).
2. Press START/ENTER.
“Lo°” will appear on the lower oven display if the actual oven 
temperature is under 170°F (77°C).
When the actual oven temperature reaches 170°F (77°C), the 
lower oven display will show the temperature increasing in 5° 
increments.
When the set temperature is reached, if enabled, one tone will 
sound.
3. Press lower oven OFF/CANCEL when finished cooking.
Preheating
After START is pressed, the oven will enter a timed preheat 
conditioning. “PrE” and the time countdown will appear on the 
display. When the preheat conditioning time ends, a tone will 
sound and the selected temperature will appear on the display.
Preheat temperatures are affected by varying factors such as 
room temperature and peak energy usage times. It is normal for 
the temperature showing on the display and the actual oven 
temperature to differ.
Waiting an additional ten minutes after the preheat conditioning 
time ends to put food in the oven is suggested when baking 
foods with leavening ingredients, such as yeast, baking powder, 
baking soda and eggs.
Broiling and Custom Broiling
1. Broil element
Broiling uses direct radiant heat from the broil element to cook 
food. During broiling, the broil element cycles on and off in 
intervals to maintain the oven temperature.
If the lower oven door is opened during broiling, the broil element 
will turn off immediately and come back on once the door is 
closed.
Use only the broiler pan and grid provided with the appliance. 
It is designed to drain juices and help prevent spatter and 
smoke.
For proper draining, do not cover the grid with foil. The 
bottom of the pan may be lined with aluminum foil for easier 
cleaning.
Trim excess fat to reduce spattering. Slit the remaining fat on 
the edges to prevent curling.
Pull out oven rack to stop position before turning or removing 
food. Use tongs to turn food to avoid the loss of juices. Very 
thin cuts of fish, poultry or meat may not need to be turned.
After broiling, remove the pan from the oven when removing 
the food. Drippings will bake on the pan if left in the heated 
oven, making cleaning more difficult.
To Broil:
Before broiling or custom broiling, position the rack according to 
the Broiling Chart.
Position food on the grid in the broiler pan, then place it in the 
center of the oven rack with the longest side parallel to the door. 
It is not necessary to preheat the oven before putting food in, 
unless recommended in the recipe.
Close the door.
1. Press CUSTOM BROIL.
2. Press START/ENTER.
The set oven temperature will appear on the lower oven 
display until the oven is turned off.
3. Press lower oven OFF/CANCEL when finished cooking.
To Custom Broil:
Changing the temperature when custom broiling allows more 
precise control when cooking. The lower the temperature, the 
slower the cooking. Thicker cuts and unevenly shaped pieces of 
meat, fish and poultry may cook better at lower broiling 
temperatures.
1. Press CUSTOM BROIL.
2. Press the number pads to enter a temperature other than 
500°F (260°C). The broil range can be set between 170°F and 
500°F (77°C and 260°C).
3. Press START/ENTER.
The set oven temperature will appear on the lower oven 
display until the oven is turned off.
4. Press lower oven OFF/CANCEL when finished cooking.
1
2
1