Brother FAX 2600 Manuale Utente

S E T U P   R E C E I V E      

If you answer a fax call on an extension phone or on an external phone in the 
EXT.  jack, you can make your FAX/MFC take over by using the Fax Receive 
Code. When you press the Fax Receive Code   

 

, the FAX/MFC starts to 

receive a fax. (See 

If the FAX/MFC answers a voice call and double-rings for you to take over, use 
the Telephone Answer Code

 to take the call at an extension phone.

If you answer a call, and no one is on the line, assume you’re receiving a fax. At 
the FAX/MFC phone, press 

, then hang up. At an extension phone, press 

 

 

, wait for fax receiving tones (chirps), then hang up. At an external phone, 

press  

 

 and wait for the phone to be disconnected (the screen displays 

RECEIVE) before you hang up.  (Your caller will have to press 

 to send 

the fax.) 

When the FAX/MFC is in FAX/TEL mode, it will use the F/T Ring Time 
(double ringing) to alert you to pick up a voice call. If you’re at the FAX/MFC, 
you can lift the handset to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T 
Ring Time and press 

 between the double rings. If no one is on the line, or 

if someone wants to send you a fax, send the call back to the FAX/MFC by 
pressing  

 

.

Remote Codes might not work with some telephone systems. The preset Fax 
Receive Code is   

 

. The preset Telephone Answer Code is 

. 

For the FAX, press 

,

,

.  

For the MFC, press 

,

,

,

.

Press 

 or 

 to select ON (or OFF) and press 

.

If you want to, enter a new Fax Receive Code, 
then press 

.

If you want to, enter a new Telephone Answer 
Code, then press 

.

Press 

 to exit.

If you are always disconnected when accessing your external TAD remotely, 
try changing the Fax Receive Code from    

 

  to  

 

 

and the Telephone 

Answer Code from 

to 

.

REMOTE ACT.:ON?

FAX RECEIVE:

*

51

TEL ANSWER:#51