Brother FAX 580MC Manuale Proprietario

M E S S A G E   C E N T E R      

You can retrieve the Memory Status List from a remote fax machine to see if you have 
any fax messages.

Dial your fax number.

When you hear the beep, immediately enter your Remote Retrieval Access Code 
(

 ).

When you hear two short beeps, use the dial pad to press 

.

Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where 
you want the Memory Status List forwarded, and then press # #.

After you hear your FAX/MFC beep, hang up and wait.

Your FAX/MFC calls the remote fax machine.  The remote fax machine prints the 
Memory Status List.

1 Memory Status List

Enter the number of a remote fax machine to 
receive a report or stored fax messages. (See 
page 9-10.)

2 Retrieve all faxes

3 Erase fax in the memory

If you hear one long beep, you can erase the fax 
message from the memory.

You can check whether your FAX/MFC has 
received any FAX or VOICE messages. If yes, 
you will hear one long beep. If no, you will 
hear three short beeps.

1 FAX

2 VOICE

If you hear one long beep, you can change the 
answer mode. If you hear three short beeps, 
you cannot change it. (Example: There is no 
MSG CTR OGM when you want to change to 
MSG CTR mode.)

1 MSG CTR

2 FAX/TEL

3 FAX

After a long beep, you can exit remote control.

You can not use 

 or  

 as dial numbers.  However, if you want to store a pause, 

press #.