Brother NC9100H Manuale Utente

4 - 5 NETBIOS PEER TO PEER PRINTING

You must now enter the server name and port name for the 
actual Print/Fax server. You can use the Browse button to 
search for the Print/Fax server, select the domain/workgroup 
name, and then the server is listed. If the print server does not 
automatically appear in your browse list, then you must ensure 
that the domain name is configured correctly. Otherwise you 
must enter the name manually. The name should be compliant 
with UNC (Universal Name Convention). For example:  

\\NodeName\ServiceName

.

Where NodeName is the NetBIOS name of the Brother Print/
Fax server (the default name is usually 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of the Ethernet address), and 

ServiceName

 is the service name for NetBIOS of the Print/

Fax server. By default it is BINARY_P1. For example:

\\BRN_310107\BINARY_P1

Then press OK.

Click the Finish button. You must now restart your computer 
before you can continue.

You must now create a printer on your Windows

®

 95/98/Me

/

2000/XP and Windows NT

®

 4.0 systems using the standard 

Windows

®

 printer setup procedure. To do this, go the Start 

button, select Setting and then Printers.

Select Add Printer to begin the printer installation.

Click Next when you get the Add Printer Wizard window.

You can find the NetBIOS name and MAC address by 
printing out the printer configuration page. see Resetting the 
Print/Fax Sever back to factory settings (Test Switch) on 
page 13-4 for information on how to print the configuration 
page on your Print/Fax server.