Brother NC9100H Manuale Utente
8 - 1 DLC PRINTING
8
NC9100h_FM6.0
8
DLC Printing
Printing from Windows NT
®
4.0 or
Windows
®
2000
Overview
DLC is a simple protocol that is included in Windows NT
®
4.0 and
Windows
®
2000 as standard. It can be used on other operating
systems (such as Windows
®
3.x) with the addition of vendor-supplied
software that supports the Hewlett-Packard JetDirect card.
Quick Tips:
1
One way to print the details of all network settings is to print a
configuration page. For information on how to print the
configuration page, see Resetting the Print/Fax Sever back to
factory settings (Test Switch) on page 13-4.
configuration page. For information on how to print the
configuration page, see Resetting the Print/Fax Sever back to
factory settings (Test Switch) on page 13-4.
Configuring DLC on Windows NT
®
4.0 and
Windows
®
2000
To use DLC on Windows NT
®
4.0 and Windows
®
2000, you must first
install the DLC protocol.
1
Log into Windows NT
®
4.0 with administrative privileges. Go to
the Windows NT
®
4.0 Control Panel and double click on the
Network icon. Windows
®
2000 users select the properties of
the Local Area Connection.
2
On Windows NT
®
4.0 systems, click on the Protocol tab, and
click Add. Windows
®
2000 users click the Install button from
the General tab.
Because DLC is a non-routable protocol, there cannot be a
router between the print server and the sending computer.
router between the print server and the sending computer.