Brother PS-300B Manuale Proprietario
![Brother](https://files.manualsbrain.com/attachments/8c662d2d9dbf4f824dfb46b9a1ababe38c435c2d/common/fit/150/50/d9563199756797e8650c01d5929471667ad930bd23805d8d5e013c9eee84/brand_logo.png)
67
BAS-311E.311EL.326E.326EL
Chapter 4. Adjustments
14. Adjusting the driving lever stopper position
1. Remove the screws
q and the top cover w.
2. If thread trimming is not performed, loosen the bolts
t so that the difference between the thread trimmer driving lever
e and the driving lever stopper r is 6 mm.
* Make sure that the clearance between the thread trimmer driving lever
* Make sure that the clearance between the thread trimmer driving lever
e and the driving lever stopper r is at the
most 0.15 mm.
The driving lever stopper
The driving lever stopper
r has an imprinted number mark: 2, 3, or 4. If the clearance is larger than 0.15 mm, replace
the driving lever stopper 4 with that with a different number. For example, when the number 3 stopper is used,
replace it with number 4 stopper. When the number 4 stopper is used, replace it with number 2 stopper.
replace it with number 4 stopper. When the number 4 stopper is used, replace it with number 2 stopper.
15. Adjusting the thread trimmer driving lever position
1. Remove the screws
q and the top cover w.
2. Turn the pulley to place the thread trimmer cam
e with its non-operating portion facing upward.
3. Loosen the nut
t. Move the screw y so that the roller r of the thread trimmer driving lever will return smoothly when
it is put into the groove of the thread trimmer cam
e.
q
w
t
e
r
e
r
6mm
6mm
q
w
y
t
r
e
Most 0.15 mm