Infocus Secure Digital (SD) & Memory Stick Manuale Utente
24
Module Status
If you have opened the Presenter-to-Go Application without the module installed and
powered you will get the “Presenter module not detected” Screen.
powered you will get the “Presenter module not detected” Screen.
Fig. 8.3: “Presenter module installed” Fig. 8.4: “Presenter module not detected
”
Resolution and Refresh Rate Selection
Tapping on the card icon will give you the Presenter-to-Go card screen. The Presenter-to-
Go card should be able to detect the proper default resolution and refresh rate for the
display it is being used with. If the module is unable to detect this information or you
wish to use settings other than the defaults, then select “Use Manual Settings”.
Go card should be able to detect the proper default resolution and refresh rate for the
display it is being used with. If the module is unable to detect this information or you
wish to use settings other than the defaults, then select “Use Manual Settings”.
Fig. 8.5 Resolution Option
Fig. 8.6 Refresh Rate Option
Show, or Hide slides