Winegard RC-DT09 Manuale Utente

- 11 -

You can control the volume using the buttons on the remote control.

Use these buttons to increase or decrease the volume.

This button is used to mute the sound of the unit. No audio will be heard once this button is 
pressed.

To cancel the mute action,  press the 

 MUTE button again.

You can view information for the current TV program by pressing the INFO button on the remote 
control.

•  The major channel number and the minor channel number if you are viewing a digital channel
•  Current time and date
•  Program title and other information if available
•  The current program’s rating
•  Broadcast format of current program
• Multilingual
• Caption

Press the INFO button again or press the EXIT button. 

To view the signal quality, press the SIGNAL button on the remote control. A beep sound will be 
heard.

1. Press 

the 

MENU button on the remote control.

2. Use 

the   /   buttons to select the CHANNEL menu.

3. Use 

the   button to select Channel Scan and press the 

ENTER button or the   button to start scanning.  

Notes:
•  The unit MUST be connected to an antenna 
 

in order to receive digital TV signals.

•  If you wish to stop scanning in the middle of the scanning 

process, press the ENTER button.

Viewing a television station after searching for channels.

Press the CH 

 buttons to select a channel, or press the number button on the remote to 

select the channel you want to watch.

•  For channels 1 to 9, enter a one-digit channel number.
•  For channels 10 to 69, enter the two-digit channel number.

IB_English.indd   11

IB_English.indd   11

2/19/2008   5:06:25 PM

2/19/2008   5:06:25 PM