Western Digital WD ShareSpace Manuale Utente
NETWORK STORAGE MANAGER: ADVANCED MODE - 121
WD SHARESPACE
USER MANUAL
To turn on the system identification LED:
System Identification identifies the location of the device. If you have multiple devices
installed, you can use this function to turn on the identification LED and know which
device you are configuring.
installed, you can use this function to turn on the identification LED and know which
device you are configuring.
1. Click ON to enable the system identification LED.
To generate an SSL certificate and key pair automatically:
1. On the Advanced page on the System tab home page, click the highlighted word
“HERE” in the Auto Generate field of the SSL certificate/key. The SSL
Certificate/Key Generation screen appears.
Certificate/Key Generation screen appears.
2. Enter the identification information you want to include in the certificate/key pair.
3. Click Submit.
To generate an SSL certificate and key pair manually:
1. Using your preferred method, generate an RSA private key and paste it in the
appropriate fields of the Advanced page.
2. Click Submit.
To select extend disk mode:
1. On the Advanced page, select Auto Extend or Manual (Extend Disk) Mode:
Auto Extend only applies when RAID type is Span and fewer than four drivers are
installed. It will extend an existing Span automatically when you add a new drive
and reboot the system. Manual allows you to choose when to add the new drive
after boot up.
installed. It will extend an existing Span automatically when you add a new drive
and reboot the system. Manual allows you to choose when to add the new drive
after boot up.
2. Click Submit.