Wayne-Dalton Z-Wave WDSF-10 Manuale Utente

15

LoCkeD/UNLoCkeD link is located in lower 
left hand corner of Thinkessentials

®

 window.

Thinkessentials

®

 software operates in two 

modes: a) locked and, b) unlocked.  Unlocked 

mode is generally used for setup and con-

figuration of the network. Most users run 

Thinkessentials

®

 in locked mode for day-to-day 

use, and unlock the software to make con-

figuration changes.  To toggle between these 

two modes, simply click on the lock icon in the 

corner of the software interface or its accompa-

nying text.

In LoCkeD mode the software:

• Does not allow changes to modules, devices, 

layout, scenes, zones, or other settings.

• Prevents the adding or removing of modules 

in the network. 

• Does allow general control, such as turning 

modules on or off or activating scenes.

•  Gives quick access to dimming or other regu-

larly used controls by right-clicking on modules.

In UNLoCkeD mode the software:

 • Allows creation and modification of Designs, 

Scenes, Zones and Settings.

• Allows user more options such as renam-

ing or configuring devices by right-clicking on 

modules.

NoTe: Some options, such as ADD DeVICe and 

ReMoVe DeVICe may still be unavailable when 

the software is unlocked if your USB

Z-Wave

®

 adapter is a secondary controller in 

the network.  only Primary Controllers can add 

or remove modules to or from a network.

