Sunfire OLE-2SF Manuale Utente

Feature Enable/Disable:
Speaker

The Olé-SF contains a small 

speaker that allows audible feed-

back signals to be heard as a result 

of button pushes. This feature can 

be disabled in the SunTools setup 

software.

IR Sensor

The Olé-SF features a built-in IR 

Sensor. IR signals from a hand-held 

IR remote control pass through the 

IR sensor and travel to the head-

end location where they control 

IR sources located there. These 

sources may be connected to a 3rd-

party Multi-Zone Controller or an IR 

distribution network.

The IR Sensor can be disabled in 

SunTools setup software.

Light Sensor Enable/Dis-

able

The Olé-SF touchpad has a light 

sensor feature.

1.  Install the unit in the wall, using 

the wall plate that will be used in 

the final installation.

.  Adjust the room lighting to the 

brightest setting possible.

3.  Select a source on the touchpad. 

The light sensor function only 

works when the unit displays the 

source icon screen.

4.  Press and hold the "SELECT" but-

ton for five seconds. Depending 

on the correct state of the sensor, 

a message will be displayed:

  “Release button to ENABLE  

sensor”

  or 
  "Release button to DISABLE  

sensor"

  Once the button is released, a 

confirmation message will be sent:

  Either:
  "LIGHT SENSOR ENABLED"
  or
  "LIGHT SENSOR DISABLED"
  When the Light Sensor is enabled, 

the Olé-SF touchpad's backlight 

will brighten or dim depend-

ing on the room's ambient light 

conditions. When the sensor is 

disabled, the Olé-SF remains at 

full brightness no matter what the 

ambient light conditions are like.

19