Roland PICZA LPX-60 Manuale Utente
2. Preparing the Machine
24
2-4 Installing and Setting Up the Software
Windows Me/98 SE
1
Before you start installation, make sure the machine
and your computer are not connected by the USB
cable.
and your computer are not connected by the USB
cable.
2
Start Windows.
3
Insert the Roland Software Package CD-ROM into
the CD-ROM drive.
the CD-ROM drive.
The window shown in the figure appears automati-
cally.
cally.
4
Switch on the machine.
Wait a short while until the lights stop flashing.
The flashing continues for about one minute.
The flashing continues for about one minute.
From this point on, keep the door closed until installa-
tion ends. Failure to do so switches off the power, which
may prevent installation from completing correctly.
tion ends. Failure to do so switches off the power, which
may prevent installation from completing correctly.
5
Connect the included USB cable.
The [Add New Hardware Wizard] dialog box appears.
6
• Windows Me
Choose [Automatic search for a better driver (Recommended)], and click [Next].
• Windows 98 SE
Click [Next].
USB connector
USB port
USB cable
Computer
The back of
the machine
the machine
Press the power button.
These lights flash clockwise
two at a time.
two at a time.
Windows Me
Windows 98 SE