Roland BR-800 Manuale Utente
40
Recording
You can adjust the stereo feel (pan) of your instruments’
input sound.
input sound.
1
Press the [TRACK] button.
2
Use the CURSOR [
] [
] buttons to move the
cursor to “PAN,” and press the [ENTER] button.
The PAN screen will appear.
D_Pan.eps
3
Use the CURSOR [
] [
] buttons to select the
input or track whose setting you want to edit.
* You can move the cursor to each track by pressing that
track’s track [REC] button.
4
Use the dial to adjust the pan while listening to the
input sound.
The pan setting you make here is automatically
applied to the pan of the recording-destination track.
This means that when you play back, you’ll hear the
sound with the same panning as during recording.
applied to the pan of the recording-destination track.
This means that when you play back, you’ll hear the
sound with the same panning as during recording.
5
Press the [EXIT] button a number of times to return to
the play screen.
1
Press the [REC] button.
The [REC] button will blink red, and the BR-800 will
enter recording-standby mode.
enter recording-standby mode.
fig.Rec03-e.eps
2
Press the [PLAY] button.
Recording will begin.
The [PLAY] button will light green, and the [REC]
button will light red.
button will light red.
fig.Rec04-e.eps
3
To stop recording, press the [STOP] button.
The track [PLAY] button will light green, indicating
that sound has been recorded on that track.
that sound has been recorded on that track.
* It’s not possible to play back sound that is shorter than one
second of recording time.
* The display will indicate “Keep power on!” while the data is
being updated. Never turn off the power while this message
is shown.
is shown.
Adjusting the Stereo Feel of
the Input Sound (PAN)
the Input Sound (PAN)
If you’re recording new material while listening to
the playback of previously recorded material, there
may be cases in which the sound you’re playing
now is buried in the previously recorded sound,
making it difficult to hear. In such cases, adjusting
the pan will make it easier to hear yourself.
You might find it helpful to pan the playback tracks
to the left (or right) and pan your own current
performance to the right (or left).
the playback of previously recorded material, there
may be cases in which the sound you’re playing
now is buried in the previously recorded sound,
making it difficult to hear. In such cases, adjusting
the pan will make it easier to hear yourself.
You might find it helpful to pan the playback tracks
to the left (or right) and pan your own current
performance to the right (or left).
Recording
Blinking
Lit
Lit
If you want to re-record
Press the [RETRY] button to return to the time
location at which you most recently started
recording. You can also press this button to return
even during recording or playback.
This is convenient when you want to re-record
immediately.
location at which you most recently started
recording. You can also press this button to return
even during recording or playback.
This is convenient when you want to re-record
immediately.
BR800_e.book 40 ページ ２０１０年３月２日 火曜日 午後６時４０分