Roland BR-600 Manuale Utente
Re
v0.10
v0.10
197
Section 6
Initializing the BR-600’s Settings
The following settings are initialized together at one time.
• System Settings
• Effects (User Patches/Song Patches)
• Rhythm (Arrangements/Patterns/Drum Kits)
• Effects (User Patches/Song Patches)
• Rhythm (Arrangements/Patterns/Drum Kits)
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“INI,” and press [ENTER].
fig.06-210
3
Press PARAMETER CURSOR [
] [
] to move the
cursor to “ALL,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.06-220
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
After the initialization has been completed, you are
returned to the Play screen.
Follow the procedure below to initialize the system
parameters.
A list of the initial settings for each parameter is given in the
“Parameter List” (p. 210).
parameters.
A list of the initial settings for each parameter is given in the
“Parameter List” (p. 210).
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“INI,” and press [ENTER].
fig.06-230
3
Press CURSOR [
] [
] to move the cursor to
“SYS,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.06-240
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
After the initialization has been completed, you are
returned to the Play screen.
Initializing All the BR-600’s
Settings
Settings
You can perform the same initialization with “INIT
ALL,” by holding down INPUT SELECT [GUITAR],
[MIC], and [LINE] while turning the POWER switch
ON, then pressing [ENTER].
ALL,” by holding down INPUT SELECT [GUITAR],
[MIC], and [LINE] while turning the POWER switch
ON, then pressing [ENTER].
However, the initialization cannot be carried out
unless a memory card is inserted in the BR-600 and the
song protect function is switched off.
unless a memory card is inserted in the BR-600 and the
song protect function is switched off.
Initializing the System
Settings
Settings
BR600_e2 197 ページ 2006年4月17日 月曜日 午前9時3分