Roland BR-600 Manuale Utente
77
Editing the Performance on a Track (Track Edit)
Re
v0.10
v0.10
Section 2
Perform the procedure given below to copy the portion
from the repeat start (A) to the repeat end (B).
from the repeat start (A) to the repeat end (B).
Ex. 1 : Copying twice to the same track
fig.02-090
Ex. 2 : Copying twice to another track
fig.02-100
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“TRK,” and press [ENTER].
fig.02-110
3
Press CURSOR [
] [
] to move the cursor to
“CPY,” and press [ENTER].
fig.02-120
4
Turn the TIME/VALUE dial to select “AB” and press
[ENTER].
[ENTER].
fig.02-130
5
Use CURSOR [
] [
] and the TIME/VALUE dial
to select the track/V-Track to copy from, and track/V-
Track to copy to.
Track to copy to.
6
Press [ENTER].
fig.02-140
7
Use [CURSOR] and turn the TIME/VALUE dial to
specify the time of the beginning of the location “T”
(To) where you want the copied data to be placed.
specify the time of the beginning of the location “T”
(To) where you want the copied data to be placed.
■
Copying the repeated
portion (AB)
portion (AB)
After specifying the time in the procedure above, a “+”
may appear to show that there is a discrepancy between
the actual current position and the position displayed. If
you specify the locations using measures, specify the
locations at each screen using the TIME/VALUE dial to
eliminate the discrepancy.
may appear to show that there is a discrepancy between
the actual current position and the position displayed. If
you specify the locations using measures, specify the
locations at each screen using the TIME/VALUE dial to
eliminate the discrepancy.
You can also enter the time using [LOCATOR], [ZERO],
[STOP] + [REW], [STOP] + [FF], and AUTO PUNCH
[IN/OUT].
[STOP] + [REW], [STOP] + [FF], and AUTO PUNCH
[IN/OUT].
Repeat
Start (A)
Repeat
End (B)
TO
Time
Repeat
Start (A)
Repeat
End (B)
End (B)
TO
Time
Copy Source
Copy Destination
BR600_e2 77 ページ ２００６年４月１７日 月曜日 午前９時３分