Razor Bicycle Accessories 25143060 Manuale Utente

Pagina di 11
Remove contents from box. Remove the foam separators that protect the components from damage during 
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have 
occurred during shipping. Because the Dirt Quad is 95 percent assembled and packed at the factory, there 
should not be any problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY 
MAINTENANCE PROCEDURES.
estimated assembly and set-up time
Razor recommends assembly by an adult. 
Allow up to 20 minutes for assembly, not including initial charge time. 
Allow up to 12 hours for initial charge (see page 4 for charging information).
 BeFOre yOu Begin
2
      warning:  
DO NOT USE NON-RAZOR 
PRODUCTS WITH YOUR RAZOR 
DIRT QUAD. The Dirt Quad 
has been built to certain Razor 
design specifications. The 
original equipment supplied at 
the time of sale was selected 
on the basis of its compatibility 
with the frame, fork and all 
other parts. Certain aftermarket 
products may or may not be 
compatible and may void your 
warranty. 
required tools
3mm, 5mm and 6mm  
Allen wrenches
(included)
Brake Lever
Speed Control
Drive 
Chain 
Front Fork
Phillips
screwdriver
(included)
8mm and 10mm open 
wrench
(included)
Bicycle tire pump for 
Schrader valves, with 
pressure gauge
(Not Included)
need Help? Visit our website for replacement parts, product support and a list of authorized service centers at 
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Charger 
(Note: Charger design may vary 
from one shown)