Raritan Computer Video Gaming Accessories 5.0.3 Manuale Utente

Raritan Remote Client (RRC)

Launching MPC from a Web Browser

Important: Regardless of the browser you use, you must allow pop-ups
from the Dominion device's IP address in order to launch MPC.

1. To launch MPC from a client running any supported browser, type

http://IP-ADDESS/mpc into the address line, where IP-ADDESS is
the IP address of your Raritan device. MPC will launch in a new
window that does not contain a menu bar, tool bar, scroll bar, or
address bar. Work in this window and toggle to other open windows
using the ALT+Tab command.

Note: The ALT+Tab command will toggle between windows only on
the local system.

2. When MPC launches, a device tree of all automatically detected

Raritan devices found on your subnet is displayed on the left side of
the screen. If you do not find your unit listed by name, create an icon
manually by selecting Connection > New Profile. The Add
Connection window opens.

3. Type a device Description, specify a Connection Type, add the

device IP Address, and click OK. These specifications can be edited
later.

4. In the Navigator panel on the left of the screen, double-click on the

icon that corresponds to your Raritan device.

If you prefer, install MPC as a standalone applet (see next section).

Note: Depending on your browser and browser security settings, you may see
various security and certificate check and warning dialog boxes. It is necessary
to accept the options in order to launch MPC.

Installing and Launching Standalone MPC

Please see Appendix A: Installing and Launching Standalone MPC for
instructions on installing the standalone version of MPC on various
operating systems.

Direct Dial Modem applies to devices running on Windows, Linux, Sun
Solaris, and Macintosh®.

Raritan Remote Client (RRC)

Important: RRC works only with MS Internet Explorer. If you are
using a different Web browser, MPC will load automatically.