Yaesu FT-450D Manuale Utente
Page 24
FT-450D O
PERATION
M
ANUAL
D
IGITAL
V
OICE
R
ECORDER
P
REPARATIONS
1. Press and hold the [F] button for one second to
enter the Menu mode. The “
” icon will ap-
pear on the display.
2. Rotate the [DSP/SEL] knob to select the menu
item “PNL-C.S”.
3. Press the [DSP/SEL] knob to enable adjustment of
this menu item. The “
” icon will be blinking.
4. Rotate the [DSP/SEL] knob to select “P/B” to as-
sign the Play Back feature to the [C.S/VOICE]
button.
button.
5. Press the [DSP/SEL] knob. The “
” icon re-
turns to appear continuously.
6. Press and hold the [F] button for one second to save
the new setting and return to normal operation.
R
ECORDING
1. Press and hold in the [C.S/VOICE] button for one
second to initiate recording. The “
” icon will
appear in the display to confirm that recording is
in progress. The recorder will store up to 20 sec-
onds of the received audio and then halt the re-
cording. The “
in progress. The recorder will store up to 20 sec-
onds of the received audio and then halt the re-
cording. The “
” icon will go out.
2. You may halt the recording in progress, by press-
ing and holding the [C.S/VOICE] button for one
second.
second.
P
LAYBACK
Press the [C.S/VOICE] button momentarily to begin
playback of the recorded audio. The “
playback of the recorded audio. The “
” icon will
blink in the display to confirm that playback is in
progress.
A
progress.
A
DVICE
:
You may adjust the playback level of the recording
with the [AF GAIN] knob
with the [AF GAIN] knob
R
ECEIVING
[F] button
[DSP/SEL] knob
[C.S/VOICE] button
[C.S/VOICE] button
[AF GAIN] knob