Yaesu FT-450D Manuale Utente
Page 65
FT-450D O
PERATION
M
ANUAL
M
EMORY
O
PERATION
QMB (Q
UICK
M
EMORY
B
ANK
)
The Quick Memory Bank is independent from the regular and PMS memories. You can quickly store operating
parameters for later recall.
parameters for later recall.
Storage
1. Tune to the desired frequency on the VFO mode.
2. Press the [STO/VOX] button momentarily. The
2. Press the [STO/VOX] button momentarily. The
“beep” will confirm that the contents of the VFO
have been written to the QMB memory.
have been written to the QMB memory.
Recall
1. Press the [RCL/HOME] button. The QMB
channel’s data will be shown on the display.
2. Press the [RCL/HOME] button to return to the
previous-used frequency (either a VFO or a
memory channel).
memory channel).
Advice:
Rotating the [MAIN DIAL] knob, or changing the op-
erating mode, will place the transceiver in the
“Memory Tune” mode (The “QMB” notation will re-
place the “MT-QMB” in the display), which is a tem-
porary “pseudo-VFO” method of tuning off of a stored
memory channel. If you do not over-write the con-
tents of the current memory channel, the original con-
tents will not be disturbed by the initiation of Memory
Tune operation. Press the [RCL/HOME] button to
return original QMB frequency and/or operating mode.
Rotating the [MAIN DIAL] knob, or changing the op-
erating mode, will place the transceiver in the
“Memory Tune” mode (The “QMB” notation will re-
place the “MT-QMB” in the display), which is a tem-
porary “pseudo-VFO” method of tuning off of a stored
memory channel. If you do not over-write the con-
tents of the current memory channel, the original con-
tents will not be disturbed by the initiation of Memory
Tune operation. Press the [RCL/HOME] button to
return original QMB frequency and/or operating mode.
[STO/VOX] button
[RCL/HOME] button