Yaesu FT-450D Manuale Utente

Page 71

FT-450D O

PERATION

 M

ANUAL

B

EEPER

 S

ETTING

Beep Volume

You may adjust the beep volume level via the Menu Item “BEEPVOL”.

1. Press and hold the [F] button for one second to

enter the Menu mode. The “

” icon will ap-

pear on the display.

2. Rotate the [DSP/SEL] knob to select the menu

item “BEEPVOL”.

3. Press the [DSP/SEL] knob to enable adjustment

of this menu item. The “

” icon will be blink-

ing.

4. Rotate the [DSP/SEL] knob to set the desired beep

volume level (FIX 0 - FIX 100).
WARNING! Do not adjust the beep volume too
high. You may press the [METER/DIM] button to
sound a beep as you adjust the [DSP/SEL] knob.
If you wish to adjust the beep volume level in ac-
cordance with the [AF GAIN] knob, press the [F]
key to change the display to “LNK-XX” then rotate
the [DSP/SEL] knob to set the volume ratio of the
beep volume level for the receiving audio volume
level. Available selections are “LNK-50” ~ “LNK 0”
~ “LNK+50”. When the “LNK 0” is selected, the
beep volume level is the same as receiving audio
volume level.
You may press the [RCL/HOME] button to reset
the beep volume level to the factory default.

5. Press the [DSP/SEL] knob. The “

” icon re-

turns to appear continuously.

6. Press and hold the [F] button for one second to

save the new setting and return to normal opera-
tion.

M

ISCELLANEOUS

 S

ETTINGS

[RCL/HOME] button

[F] button

[DSP/SEL] knob

[METER/DIM] button