ZyXEL ZYAIR B-4000 Manuale Utente
ZyAIR B-4000
18
4 Hardware Installation
The following sections describe the different installation options.
Leave adequate space on the rear and sides of the ZyAIR during hardware
installation and do not block the ventilation holes.
4.1 Desktop Installation
1. Make sure the ZyAIR is clean and dry. Set the ZyAIR on a smooth space strong enough to
support the weight of the ZyAIR and the connected cables. Make sure there is a power outlet
nearby.
nearby.
2. Make sure there is enough clearance around the ZyAIR to allow air circulation and the
attachment of cables and the power cord.
4.2 Wall-mount Installation
Follow these steps to attach your ZyAIR to a wall.
1. Locate a high position on the wall that is free of obstructions.
2. Install two screws in the wall 123mm apart. Use screws with 6mm ~ 8mm (0.24" ~ 0.31")
1. Locate a high position on the wall that is free of obstructions.
2. Install two screws in the wall 123mm apart. Use screws with 6mm ~ 8mm (0.24" ~ 0.31")
wide heads. Do not screw the screws all the way in to the wall. Leave a small gap between the
head of the screw and the wall. The gap must be big enough for the screw heads to slide into
the screw slots and the connection cables to run down the back of the ZyAIR.
head of the screw and the wall. The gap must be big enough for the screw heads to slide into
the screw slots and the connection cables to run down the back of the ZyAIR.
Make sure the screws are securely fixed to the wall and strong enough to
hold the weight of the ZyAIR with the connection cables.
3. Adjust the cables.
a. Run the connection cables down the back of the ZyAIR or
b. Run the connection cables upward and along the edge of the ceiling.
4. Align the holes on the back of the ZyAIR with the screws on the wall. Hang the ZyAIR on the
screws.