ZyXEL ZYAIR B-4000 Manuale Utente

ZyAIR B-4000 

2 

1 Introducing the ZyAIR 

The ZyAIR Hot Spot Gateway combines an 802.11b wireless access point, router, 4-port switch and 
service gateway in one box. An “exclusive printer” connects directly to the ZyAIR, allowing you to 
easily print subscriber statements. The ZyAIR is ideal for offices, coffee shops, libraries, hotels and 
airport terminals catering to subscribers that seek Internet access. You should have an Internet 
account already set up and have been given usernames, passwords etc. required for Internet access. 

 

DEVICE PORT    Use the printer cable to connect the included printer (“exclusive printer”) to this port. 

WAN 

Connect your broadband modem to this port with the Ethernet cable that came with your 
modem. 

LAN 1-4 

These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a 
straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub. 

Power 

After you’ve made the above connections, connect the ZyAIR’s included power adaptor to 
the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on. 
The SYS LED blinks while performing system testing and then turns steady on if the 
testing is successful. A LAN LED turns on if a LAN port is properly connected. Refer to the 
following table for more detailed LED descriptions.