Znyx Networks bh5700 Manuale Utente

named zhp1. This VLAN includes four switch ports, zre1, zre10, zre11, zre13.

zhp0: vlan100 = zre1,zre10,zre11,zre13;

The next statement adds two switch ports, zre1, zre2 and zre3, to an existing network 
interface and VLAN.

zhp0: vlan100 = zre1..3;

The next statement deletes two switch ports, zre1 and zre2, to an existing network interface 
and VLAN.

zhp0: zre1..2 teardown;

The final example is a teardown action that deletes the VLAN group defined in the previous 
example, including the network interface.

zhp1: teardown;

Port interface statements specify a port or trunk name or a list of such names; followed by an 
equal sign (=) and then the action. Port interface actions may include:

zconfig <zre_list>=untag<n>

untag<N>

Packets sent from this port or trunk for VLAN <N> 

are transmitted without a VLAN tag. The port or trunk 

specified must have previously been included in the VLAN group 
with VID<N>.

zconfig <zre_list> multicast=<forward_type>

<forward_type>

Set the ports specified to act as defined by 

the forward_type for multicast traffic.  Possible 
<forward_types> are:

forward_unregistered (default)

forward_all
filter_unregistered

Assuming that zre1 has been assigned to VLAN 1, to specify that packets sent from port 1 for 
VLAN 1 are transmitted without a VLAN tag, and packets arriving on this port without a VLAN 
tag are given the VLAN tag with the VID number 1, enter:

Ethernet Switch Blade User's Guide

release  3.2.2j

page  203