Znyx Networks bh5700 Manuale Utente

vrrpconfig – Configure and control the running vrrpd

vrrpconfig [-d <level>] -- <vrrpd parameters>

vrrpconfig [-d <level>] [-k] [-a] [-p] [-s <vid>]

vrrpconfig provides communication with a running vrrpd daemon.  The  -- option for 
vrrpconfig will pass all parameters to vrrpd as would be done when starting the vrrpd. 
Any output generated by vrrpd is displayed on the vrrpconfig controlling tty. Any action 
normally taken by vrrpd for the given parameter is done so by vrrpd. Reference vrrpd for 
vrrpd parameters and their usage. 

vrrpconfig also has a set of local options that are not passed to vrrpd directly.  Many do, 
however, retrieve information from the running vrrpd. The local options are as follows:

-d <level> Set the debug level.  The default debug level is 1. 

The higher the level, the more debugging output is produced. 
Debugging output is sent to the controlling tty.  This debugging 

output is from vrrpconfig.  To set the debug level of vrrpd, one 
would use the vrrpd debug level setting option placed after the 

-- in the vrrpconfig command line.

-a

Display in a user readable format, information about the 

current state of all the Virtual Routers controlled by vrrpd.

-k

Kill vrrpd.  The entire daemon is killed.  Running this 

command will require that vrrpd be restarted.

-p

Display relevant SNMP table values.

-s <vid>

Print a numeric representation of the state of the 

Virtual Router associated with the Virtual Router Identifier 

<vid>.  The numeric representations are 1 = INIT, 2 = BACKUP, and 
3 = MASTER 

Ethernet Switch Blade User's Guide

release  3.2.2j

page  267