Znyx Networks bh5700 Manuale Utente
files run the Surviving Partner. This is a list of all configuration and script files:
/etc/rcZ.d/S70Surviving_partner
The main startup script that starts the Surviving Partner by
running zconfig, ifconfig, zlmd and vrrpd. zspconfig prompts
running zconfig, ifconfig, zlmd and vrrpd. zspconfig prompts
the user to run this script. This file can be saved with
zsync to automatically start the Surviving Partner at switch
zsync to automatically start the Surviving Partner at switch
boot.
/etc/rcZ.d/surviving_partner/vrrpd.conf
Configuration script for the VRRP daemon. This configuration
Configuration script for the VRRP daemon. This configuration
is used when the S70Surviving_partner script launches vrrpd.
There is a line in this file for each router address vrrpd
There is a line in this file for each router address vrrpd
will manage. Or stated another way, each virtual_address
command in the zspconfig configuration file results in a line
command in the zspconfig configuration file results in a line
in vrrpd.conf.
/tftpboot/zsp.conf<n>
zspconfig configuration file that contains the configuration
zspconfig configuration file that contains the configuration
of the sibling backup switches. The <n> is used to
distinguish potentially more than one backup switch. This
distinguish potentially more than one backup switch. This
configuration file is placed in /tftpboot, and is retrieved
via DHCP by a replacement switch on boot up.
via DHCP by a replacement switch on boot up.
/etc/rcZ.d/surviving_partner/dhcpd.conf
Configuration script used by dhcpd when the switch becomes
master. dhcpd is used to serve replacement switches their
master. dhcpd is used to serve replacement switches their
configuration scripts. Namely a zsp_DC.conf file that can be
input to the zspconfig with the -u flag.
input to the zspconfig with the -u flag.
/etc/rcZ.d/surviving_partner/dhclient.conf
If zspconfig is executed with the -u flag, a dhclient.conf
file is created, and then dhclient is used to retrieve a
file is created, and then dhclient is used to retrieve a
zspconfig configuration file from the /tftpboot area of the
Master switch.
Master switch.
/etc/rcZ.d/surviving_partner/vrrpd.script
Runtime script that executes each time the vrrpd changes
state. This script starts and stops dhcpd, and toggles down
state. This script starts and stops dhcpd, and toggles down
bonding driver/RAINlink ports to force the nodes to a new
Master switch.
Master switch.
/etc/rcZ.d/surviving_partner/zlmd.script
Runtime script executed by zlmd when a link goes up or down.
This script modifies the priority of vrrpd, which in turn may
This script modifies the priority of vrrpd, which in turn may
cause the VRRP Master to move from one sibling switch to
another.
another.
SEE ALSO
zconfig, ifconfig, vrrpd, dhclient, dhcpd, zpeer
Ethernet Switch Blade User's Guide
release 3.2.2j
page 334