Znyx Networks bh5700 Manuale Utente

  # This script will likely need modification for your particular

  # network setup.

  #

  # In this example the Egress ports, zre20..23 and zre48..50 are

  # not managed by HA since how, or if, these ports are managed 

by HA is

  # dependent on the external devices they are connected to. 
Non-HA

  # egress ports can be brought up through conventional means by 

adding

  # an S-script to /etc/rcZ.d.  If the ports are to be managed by 
HA, they

  # can be added to an existing VLAN(zhp) or a new VLAN(zhp) can 

be created

  # If a new VLAN(zhp) is to be managed by HA, add a zconfig, 
sibling_address,

  # and vrrp_virtual_address configuration line and define the 

port type as

  # appropriate.

  #

  # The interconnect port is needed in the VLANs connected to the

  # RAINlink ports.

  #

zconfig zhp0: vlan100 = zre51;

zconfig zhp1: vlan1 = zre0, zre4, zre8, zre12, zre16, zre24, 
zre28, zre30, zre32, zre34, zre36, zre38, zre40, zre42, zre51;

zconfig zhp2: vlan2 = zre1, zre5, zre9, zre13, zre17, zre25, 

zre29, zre31, zre33, zre35, zre37, zre39, zre41, zre43, zre51;

zconfig zhp3: vlan3 = zre2, zre6, zre10, zre14, zre18, zre26, 
zre51;

zconfig zhp4: vlan4 = zre3, zre7, zre11, zre15, zre19, zre27, 

zre51;

Ethernet Switch Blade User's Guide

release  3.2.2j

page 36