Vupoint Solutions PDSBT-ST43-VP Dépliant

 

Color /Monochrome (Mono) scan selection   
600/300 dpi resolution scan selection   
Built-in BLUETOOTH® wireless technology 
Directly save JPEG file to microSD/microSDHC card 
Supports microSD/microSDHC card up to 32GB 
Driver free to download for Windows® XP, Windows® Vista™,   
Windows® 7 and Mac OS® 10.4 or above 
(direct plug-in, driver installation not required) 

   

 

   

 

Scan LED indicator 

Ready for scan: Green LED on 

Error LED indicator 

Over speed: Red LED on 
Charging battery: Red LED on until complete. 

LCD screen 

Scanning status display 

BT LED indicator 

Bluetooth: Blue LED on 

Scan button 

In power on mode, press this button to start scanning, 
press this button again to stop scanning 

Battery door 

For 4.2V rechargeable battery 

microSD card slot 

microSD/microSDHC card storage location. 

Time set 

When Scanner is power on, press to enter Time and Date 
setting mode 

Format button 

When Scanner is power on, press this button to format the 
microSD/microSDHC card. 

Power / Bluetooth 
button 

Bluetooth On/Off: Switch this key left to [BT] mode to 
enable Bluetooth techonolgy

 

Power On/Off: Switch to [SCAN] mode to turn on scanner 
Switch to [OFF] mode to turn off scanner. 

USB interface 

Download photo to a computer via USB cable provided. 

Resolution 

Select High(600dpi) / Low(300dpi) resolution;   
High / Low resolution mode icon will be displayed on status 
LCD screen. 

C/BW 

Select Color/Mono scan, Color/Mono mode icon will be   
displayed on status LCD 

 

 

 

SD card indicator 

    Photos will be stored in microSD card 

Battery indicator 

 Battery is full  

 Empty battery 

Effect indicator 

Color or Mono 

Counting indicator 

Show scanned files in microSD card 

Selected resolution 

High:600 dpi / Low:300 dpi 

 
 

“GREEN” SCAN LED ON   

  Scan in progress. 

“GREEN” SCAN LED OFF 

  Standby / Scan is complete. 

------------------------------------------------------------------------------------------------------------- 

     

“RED” ERROR LED ON     

 

Scanning too fast. 

May cause scanning error. 
Restart and scan again. 

                                     When connected to USB or power adapter: Charging 

 

“RED” ERROR LED OFF 

   

No error in scanning speed. 

Continue scanning process. 

                                     When connected to USB or power adapter: Charging 
 

 

 

 

 

 

complete. 

------------------------------------------------------------------------------------------------------------------------------- 
                “BLUE” BT LED ON      

   

Bluetooth wireless technology is enabled 

 

﹡

Scan will START when

 

button is pressed 

﹡

To END scan, press 

  button again 

 
 

1. 

Before first using the scanner, it is recommended to charge the battery for 6-8 
hours. 

2. 

To charge, connect the scanner to a (1) USB 2.0 port or (2) an outlet with the power 
adapter included. When charging, “Err” (Error) red light will be lit and will turn off 
once the battery is fully charged. 

Note: Do not remove or the battery from the battery compartment. 

 

 

To operate the scanner, you must insert a microSD Card (not supplied) to record and store your 
pictures. Inserting the microSD memory card: 

1. 

Turn OFF the scanner. 

2. 

Insert the microSD card into the microSD card slot (with metal side facing upwards). 
Gently press in until card is clicked in and latched. The SD card indicator 

 must 

appear on the LCD screen.   

Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory 

card. Align microSD card position (as marked) and try again. 

 
 
 
 

 

 

 

1. 

Press [TIME SET] button to enter time setting mode by using a thin, blunt object, 
such as a paperclip to access the button. The LCD screen will read “1##” (step 1) for 
the year. “##” is a set of numbers that would be changed to correspond to the actual 
time/date setting. The numbers 1-5 in front of “##” indicates each step in the settings. 

2. 

Press the [C/BW] or [DPI] buttons to select the current Year.   

3. Press 

  button to confirm setting. The LCD screen will now read “2##.”     

4. 

Repeat steps 2 and 3 to select the Month, Date, Hour, and Minute. 

 

1## Year 
2## Month 
3## Date 
4## Hour 
5## Minute 

 
5 

After setting the Minute, “5##”, press the [TIME SET] button again to complete the 
Time and Date setting. 

Note: All contents on the microSD card will be erased during formatting. 

1. 

Insert a microSD card into the scanner with metal side facing upwards. Then power 
on the scanner. 

2. 

Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip 
to access the button. An “F” shows on the LCD screen. 

3. Press 

the 

  button once to begin formatting microSD card. 

4. 

The SD card indicator 

  will flash until the formatting process is complete.     

1. 

Clean the glass shield located on the bottom of scanner with the cleaning cloth 
provided. 

2. 

Turn on the scanner by sliding the [POWER] switch to [SCAN] mode. Then place the 
scanner on the provided “White Balance Calibration” paper. 

3. 

Click and hold onto the [C/BW] button. While holding onto the [C/BW] button, press 
the 

  button once and then release both buttons. SD card indicator 

 

will flash and “GREEN” and “RED” LED light will turn on. 

4. 

Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED 
light will stay on. 

5. 

With only the “GREEN” LED light on, start scanning the white paper by sliding the 
scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner 
backwards if necessary).   

6. 

Slide the [POWER] switch to [OFF] to turn off the scanner. Calibration is completed. 

1. 

By pressing the [DPI] resolution button on the scanner, you may choose between 
high resolution (600 dpi) and low resolution (300 dpi).   

2. 

The high or low resolution mode will be displayed on the LCD screen to reflect your 
choice. 

 

1. 

Turn on the scanner by sliding the [POWER] switch to [SCAN] mode. 

2. 

Place the document on a flat surface and hold down the document with one hand. 

3. 

Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto 
the paper to ensure the most of the document can be scanned. Make sure to keep 
the scanning area in between the scanning width indicators marked on the side of 
the scanner.