Viking Huskylock 936 Manuale Utente
—43—
7
8
11
13
14
7. Remove the needle plate ( C ).
8. Put on the standard needle plate ( S ).
9. Raise the cutter.
10. Replace the needles according to desired
stitch.
11. Snap on the standard presser foot ( S ).
12. Turn the handwheel by hand to set the
needle to the lowest position.
13. Move the Chain / Cover select lever from “C”
to “S”.
(Turn the handwheel by hand to make sure that
the upper looper moves.)
14. Slide on the standard cover ( S ) to the front
cover.
15. Close the front cover.
16. Put on the fl atbed and free arm cover.