Vieta VH-HA075 Manuale Utente

HIFI Amplifier

 

Check that the Power Switch on front of the amplifier is in the off position. Push the plug (IEC line socket) of the 
power cable supplied with the amplifier into the socket (AC INPUT) on back of the unit. Make sure it is pressed in 
firmly. Plug the other end of the power cable into an AC wall outlet.

 

 

 

 

PROBLEM 

   CAUSE/REMEDY

No power when the amplifier is   

 

-Switch on the electric current at the socket.

turned on.   

 

 

 

-Check that the plug has been correctly inserted 

     into 

the 

socket.

 

 

 

 

 

-The internal fuse has blown and must be replaced

 

 

 

 

 

by a qualified service technician.

 

No sound.   

 

 

 

-The power cord has been damaged and must be

     replaced.
 

 

 

 

 

-The amplifier has not been turned on.

 

 

 

 

 

-The volume control is set at a minimum.

 

 

 

 

 

-The speaker cables have not been correctly

     connected.
 

 

 

 

 

-A wrong input source has been selected.

 

 

 

 

 

-No input source has been connected.

There is sound in one channel 

 

 

-The audio input cables or speaker cables

only. 

 

 

 

 

have been incorrectly connected or damaged.

     -The 

input 

source 

is 

defective.

     -The 

speakers 

are 

defective.

 

High buzzing. 

 

 

 

-The audio input cables have been incorrectly

     connected 

or 

damaged.

 

 

 

 

 

-The ground cable for the record player has not 

     been 

connected.

 

 

 

 

 

-The record player pick-up is defective.

Weak bass and poor stereo perspective.  

 

-The speaker connection is out of phase. Check that

 

 

 

 

 

the positive and negative poles have been correctly

 

 

 

 

 

connected, both at the back of the amplifier and at

     the 

back 

of 

the 

speaker.

 Distortion of sound.    

 

 

-Some of the conductor wires of the speaker cable

 

 

 

 

 

are in contact with each other which causes

     distortion.
 

 

 

 

 

-The volume is set too high.

The unit does not switch between input 

 

- The amplifier is defective and should be serviced 

modes. 

 

 

 

 

by a qualified technician.