Uniden UDW10055 Manuale Utente

7

Switch the bracket
If you want to mount the
camera in a hanging 
position, you’ll need to flip 
the bracket to the top of 
the camera:

1.  Remove the bolts 

on the side of the 
mounting bracket.

2.  Carefully slide the 

bracket off of the 
camera and sun shield.

3.  Rotate the bracket 180° 

and slide it back onto 
the camera.

4.  If necessary, adjust the 

camera angle, then 
replace and tighten the bolts.

1.  Hold the base of the camera stand 

where you want to mount it, and 
mark the location of the screw 
holes. 

2.  Use the included screws and 

anchors to attach the base to the 
wall or ceiling.

3.  Before attaching the camera, tug 

gently on the stand to make sure it 
is securely in place. 

Remove the bolts

and slide the mounting 

bracket off of the camera.

Flip the bracket upside 

down and slide it back 

onto the camera.

Adjust the camera to 

the desired angle 

and replace and 

tighten the bolts.