Ultratec CAPTEL 200 Manuale Utente

Using the CapTel is easy — just pick up the handset and dial:

Verify that the Caption feature is on.  The red light over the 

button should be lit.  If the light is not on, turn on the feature by
pressing the 

button before dialing your call.

Pick up the handset.  Dial the phone number of the person you are
calling (example: 555-1234).
Remember to dial a 1 + area code 
if the number is long distance.

After a few seconds you will see
a message letting you know that the
Captioning Service is being connected
to your CapTel phone.  Once
connected, the Captioning Service
dials the person you are calling.

You may begin speaking as soon 

as you hear the other person answer
or see the Signal Meter flicker 
(see Knowing What is Happening 
on the Line on page 14).

NOTE: If the Caption feature is turned off when you dial, the
Captioning Service will not be connected and you will not receive
captions.  You cannot turn on captions manually in the middle of a call
with 1-Line CapTel.  If you would like captions, hang up, turn on the
Caption feature, and place the call again.

NOTE: If you need to dial a number for an outside line and/or you have
call-waiting, see page 20 and 21 before placing your first call.  For
additional calling instructions and tips, see Helpful Tips on page 41. 

I